Car Drifting

How To Build An RC Drift Car – Beginners Guide

This post may contain affiliate links. If you click an affiliate link and make a purchase, I may earn a commission. Also, as an Amazon Associate I earn from qualifying purchases.

So you want to know how to build an RC Drift Car? Building an RC Drift Car is relatively simple especially when you use specific kits and parts made for drifting. RC Drifting can be a great hobby and learning to build your very own RC Drift Car is the best way to understand how the car will perform.

What do you need to make an RC drift car?

Steps to Build an RC Drift Car:

– First, you need a chassis. This is the frame of your car and will determine how far apart the wheels are from each other which affects drift ability. There are many kits available with preassembled parts or skeleton frames for building but this can be expensive if it isn’t something you want to do often.

– Second, you need a motor and ESC (electronic speed control). The power for your car will come from these two components. Look for a brushless set-up to provide the most power and efficiency.

– Next, get some tires. Tires are obviously important for drifting and should be chosen with care. Soft compound tires with a lot of grip are best for drifting.

– Finally, you need to add in some electronics. This includes the radio system, receiver, and battery. Make sure you have a transmitter that can control steering and throttle (or brake) independently.

Now that you know how to build an RC Drift Car, it’s time to get out there and start practising. Be sure to stock up on all the necessary parts and kits so you can build your perfect car.

How do you drift an RC car step by step?

There are a few basic things you need to do in order to drift an RC car:

– first, make sure your car is travelling at a moderate speed and is stable.

– next, apply the throttle or brake (depending on which way you want the car to turn) to initiate the drift. You will also need to steer the car in the desired direction.

– finally, maintain control of the car by adjusting the throttle and steering as needed.

It takes a lot of practice to be able to drift an RC car successfully but with some patience, you’ll be drifting like a pro in no time!

You may find that you need to wear your tires a little to get the best angles when drifting, this is very common and is actually done with real cars.

You need to get the right balance between grip and slip, this can only be done by you. This is because there are so many variables included, things like terrain, weather conditions, skill levels, weight distribution, and so on.

Black car Drifting

What is the best motor for RC drifting?

There is no one definitive answer to this question as different motors work better for different people in different situations. However, a brushless motor is generally the best option for an RC drift car as it provides good power and efficiency.

When looking for a motor, you should consider things like how much power you need and what type of ESC (electronic speed control) you have. There are many brushless motors on the market and it’s important to do your research before purchasing one.

What is an RC Brushless motor?

An RC brushless motor is a type of electric motor that uses an external device to control the speed and direction in which the rotor rotates. This gives it more precise control than standard brushed motors but can be expensive for hobbyists on a budget. Brushless motors are used commonly in drones, cars, planes, helicopters, multi-rotors, and more.

A brushless motor helps regulate the power and helps give you instant acceleration, this is obviously a must when drifting as you will need to feather the power to keep your drift as long as possible.

How do you tune an RC drift gyro?

Tuning an RC drift gyro can be a little difficult but it’s certainly not impossible. In fact, the best way to tune your car is by testing and adjusting while you are driving. Every track will have its own variables that change how well your car performs so you should always try out every different setup before deciding on which one is your favorite.

What does a drift servo do?

A drift servo allows for independent control of steering and throttle/braking functions from either end of the transmitter sticks or dials, this makes drifting much easier as both controls can now operate independently from each other without any interference between them which would cause instability in the vehicle performance during turns. This type of setup works great with ready-to-run (RTR) cars and trucks.

What is a good RC drift car for beginners?

When looking for a good RC drift car for beginners, you should consider things like the cost of parts, how easy it is to repair, and the availability of replacement parts. You also want to make sure that the car has enough power to handle different types of surfaces.

One great option for a beginner RC drift car is the Traxxas Rustler VXL which comes with an impressive 150cc motor and TQi transmitter. It’s also very affordable compared to other options on the market, making it a great choice for those just getting started in the hobby.

Can you drift a Nitro RC Car?

Yes, you can drift a Nitro RC car but it takes a lot of practice and skill. In order to drift a nitro car, you need to be able to control the power going to the wheels and also how much your car is sliding. It’s important to note that drifting a nitro car requires more throttle than an electric car which means that you will need to have good hand/eye coordination in order to keep the car from spinning out of control.

Once you have mastered drifting an electric RC car, then you can start practising with a nitro-powered model. Just remember that it will take time and patience before you are able to do it successfully on any type of track or terrain.


Building and tuning an RC drift car can be a lot of fun but it takes practice and skill to do it correctly. By understanding the basics of how these cars work, you’ll be one step closer to mastering this exciting hobby. Happy drifting!